Clutch Slave Cylinder: Remove & Replace

WARNING: This page is about the Bronco 4.9L Eng VIN E, Trans Mfr CD NP435, which is a different variant/trim than selected.

Includes: R&I Transmission and Bell Housing (where necessary).

Applies To	Standard Hours	Warranty Hours	Skill Level
	0.8	0.6	C
Additional Procedure: CLUTCH SLAVE CYLINDER: Remove & Replace:
w/Skid Plate add	0.2		C
Where necessary to R&I Carpet add	0.8		C
Combination Procedure: CLUTCH SLAVE CYLINDER: Overhaul:
	0.5		B