Key Will Not Or Is Hard To Turn
| STEP | WHAT TO DO | OK (no problem found) | PROBLEM FOUND | CORRECTION |
|---|---|---|---|---|
| 1 | DOOR MECHANISM OPERATION CHECK | End of diagnosis | Torque higher than 0.3 N.m | Go to step 2 |
| Remove the device from the vehicle and check whether the idling activation torque is higher than 0.3 N.m | ||||
| 2 | DOOR LOCK CYLINDER CONDITION CHECK | End of diagnosis | Torque higher than 0.3 N.m | Replace the front door lock cylinder. |
| Apply rust remover and then lubricate through the key hole Try again to activate the mechanism; do not exceed the torque of 2 N.m in order to not damage the key |