LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2021 >> 500X Pop >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Pod, Switch >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0174193Courtesy of CHRYSLER GROUP, LLC
  1. Position the switch pod (2) to the instrument panel center bezel and install the three screws (1) for the switch pod (2). Tighten the screws securely.
  2. Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL AND INSTALLATION .
  3. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals