LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2020 >> 500L Pop >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Seats, Front >> Seat, Front >> Installation

Seat, Front: Installation

GC0158672Courtesy of CHRYSLER GROUP, LLC
NOTE:

If equipped with a seat air bag, lift the seat only and only in the area of the head restraint and the front of the seat cushion.

  1. Position the seat (1) into the vehicle.
  2. If necessary, position the seat in the fully rearward position.
  3. Loosely install the seat to riser bolts (2) located in the front of the front seat (1).
  4. Connect the seat wiring connectors.
  5. Position the wiring access cover (3) and install the retainers fully.
    GC0159067Courtesy of CHRYSLER GROUP, LLC
  6. Connect the negative battery cable.
  7. Position the seat fully forward.
  8. Loosely install the seat bolts (2) located in the rear area of the front seat (1).
    GC0158772Courtesy of CHRYSLER GROUP, LLC
  9. Tighten the rear inboard bolt (4) to the proper specifications. Refer to TORQUE 
  10. Position the seat in the fully rearward position.
    GC0159127Courtesy of CHRYSLER GROUP, LLC
  11. Tighten the front inboard bolt (2) to the proper specifications. Refer to TORQUE 
  12. Tighten the front outboard bolt (3) to the proper specifications. Refer to TORQUE 
  13. Position the seat fully forward.
    GC0158772Courtesy of CHRYSLER GROUP, LLC
  14. Tighten the rear outboard bolt (4) to the proper specifications. Refer to TORQUE 
  15. Inspect the seat tracks by moving the seat several time to be certain they lock into the tracks simultaneously.
scientia non olet · About LEMON Manuals