WATERSHIELD, Door: Removal
NOTE:
Always replace the watershield, even if it was removed intact. The adhesive will not guaranty the necessary seal once it has been removed from the inner door.
- Remove the trim door panel (1), Refer to PANEL, DOOR TRIM, REMOVAL .
- Remove the front door speaker. Refer to FRONT DOOR
- Carefully, detach the adhesive (1) of the watershield (2) from the entire perimeter of the inner door.
- Disconnect the wiring routing retainers and route the harnesses (2) through the watershield (3).
- Route the latch cable (1) through the watershield (3).
- Remove the watershield (3) from the door.