Pod, Switch: Installation

NOTE:

After repair, the power locks may need to be configured. Perform the CONFIGURE DOOR LOCK ROUTINE. Refer to CONFIGURE DOOR LOCK ROUTINE .

NOTE:

Take the proper precautions to protect the face of the center bezel from cosmetic damage while performing this procedure.

Courtesy of CHRYSLER GROUP, LLC

Connect the electrical connector (1) to the switch pod (2).

Courtesy of CHRYSLER GROUP, LLC
Install the three screws (1) that secure the switch pod (2) and securely tighten.

Courtesy of CHRYSLER GROUP, LLC
Install the instrument cluster bezel (1). Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
Connect the negative battery cable.
Perform the CONFIGURE DOOR LOCK ROUTINE. Refer to CONFIGURE DOOR LOCK ROUTINE .