LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2019 >> 500L Pop >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Base Brakes (Service Information) >> Parking Brake >> Lever, Parking Brake >> Installation

Lever, Parking Brake: Installation

GC0184309Courtesy of CHRYSLER GROUP, LLC
  1. Position the parking brake lever (5b) to the floor pan and install the park brake lever bolts (5a) and tighten the bolts to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Install the park brake cables (2) into the equalizer on the parking brake lever output cable.
  3. Connect the parking brake switch wire harness connector and engage the wire harness retainer.
  4. Perform the parking brake adjustment procedure. Refer to PARKING BRAKE ADJUSTMENT  .
  5. Install the center floor console. Refer to CONSOLE, FLOOR, INSTALLATION .
  6. Remove the blocks from the tires and wheel assemblies.
  7. Connect the battery negative cable to its post on the battery.
scientia non olet · About LEMON Manuals