Axle Assembly, Rear: Inspection

Verify proper torque of all axle fasteners.

Inspect the axle looking for damage or bending. If damage is evident, the axle must be replaced.

Inspect for broken or cracked welds at each end of the twist beam within the axle. Inspect for broken or cracked welds at each bushing bore. If a problem is present, the axle must be replaced.

Inspect the bushings in the axle. Look for damage or deterioration of the bushings. Make sure the bushings are centered side-to-side in their bore. If a problem exists, the axle must be replaced. The bushings cannot be replaced separately from the axle.