LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2019 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Control Modules (Service Information) 500 - Electric) >> Standard Procedure >> Radio Programming

Radio Programming

WARNING: This page is about a different variant/trim than selected.
  1. Connect the diagnostic scan tool.
  2. Check vehicle for Diagnostic Trouble Codes (DTC)s.
  3. Clear all stored DTCs.
  4. Turn the ignition OFF, then ON and confirm DTCs are gone.
  5. Perform the Proxi alignment located in the Body Control Module (BCM). Navigate to BCM > Misc. Functions > Proxi Alignment. Select and run the routine.
scientia non olet · About LEMON Manuals