Shield, Splash, Rear Wheelhouse: Removal

Courtesy of CHRYSLER GROUP, LLC

Base model shown in the illustration, other models typical unless noted.

1. Raise and support the vehicle.
2. Remove the rear wheel.
3. Remove the rear splash shield to rear fascia fasteners (1).

   Courtesy of CHRYSLER GROUP, LLC

4. Remove the splash shield to bodyside fasteners (1).

   Courtesy of CHRYSLER GROUP, LLC

5. Disengage the retaining tab securing the splash shield (1) to the rear fascia (2).
6. Remove the rear splash shield (1) from the vehicle.