LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 64 (Power Mirrors (Service Information) 500 - Electric) >> Switch, Mirror >> Installation

Switch, Mirror: Installation

WARNING: This page is about a different variant/trim than selected.
GC0152773Courtesy of CHRYSLER GROUP, LLC
  1. Position the power mirror switch (2), and connect the electrical harness connector (1).
  2. Place the mirror switch in bolster opening (3), and firmly snap into place.
  3. Connect the 12 volt negative battery cable.
  4. Power up the high voltage system. Refer to HIGH-VOLTAGE POWER UP .
scientia non olet · About LEMON Manuals