Differential, Transaxle: Assembly
WARNING: This page is about a different variant/trim than selected.
NOTE:
The differential case and side gears are not serviced separately and must be replaced as an assembly.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the ring gear to the case.
- Install the new
ring gear bolts (1) and tighten to 88 N.m (65 ft. lbs.).
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the differential bearings (1) using an arbor press and (special tool #6448A, Installer, Bearing/Gear) (2).