LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Electric Powertrain System - 500 - Electric) >> Electric Vehicle Control System >> Switch, Electric Shifter >> Installation

Switch, Electric Shifter: Installation

WARNING: This page is about a different variant/trim than selected.
GC0157810Courtesy of CHRYSLER GROUP, LLC
  1. Install the electronic shifter switch (2) in the bezel until the four clips (1) are engaged.
    GC0157813Courtesy of CHRYSLER GROUP, LLC
  2. Connect the three electrical connectors (1) below the electronic shifter switch bezel.
    GC0157613Courtesy of CHRYSLER GROUP, LLC
  3. Install the electronic shifter switch bezel (1).
  4. Connect the negative 12-volt battery cable. Refer to ELECTRIC VEHICLE CONTROL SYSTEM, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals