LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Electric Powertrain System - 500 - Electric) >> Electric Vehicle Control System >> Speaker, Pedestrian Alert >> Installation

Speaker, Pedestrian Alert: Installation

WARNING: This page is about a different variant/trim than selected.
GC0157778Courtesy of CHRYSLER GROUP, LLC
  1. Install the pedestrian alert speaker, and install and tighten the pedestrian alert speaker bolt (2) to 10 Nm (89 in. lbs.).
  2. Connect the pedestrian alert speaker electrical connector (1).
  3. Install the front fascia. Refer to FASCIA, FRONT, INSTALLATION .
scientia non olet · About LEMON Manuals