LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Electric Powertrain System - 500 - Electric) >> Electric Vehicle Control System >> Pedal, Accelerator >> Removal

Pedal, Accelerator: Removal

WARNING: This page is about a different variant/trim than selected.

The Accelerator Pedal Position Sensor (APPS) and the accelerator pedal are serviced together as an assembly including the bracket.

GC0152511Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the accelerator pedal position sensor (APPS) electrical connector (1).
  2. Remove the accelerator pedal bracket nuts (3) and remove the accelerator pedal assembly (4) from the mounting studs (5).
scientia non olet · About LEMON Manuals