LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 57 (Clutch System - 500) >> Cylinder, Clutch Slave >> Installation >> C514

Cylinder, Clutch Slave: Installation: C514

WARNING: This page is about a different variant/trim than selected.
GC0152883Courtesy of CHRYSLER GROUP, LLC
  1. Install the slave cylinder (2) to the transmission.
  2. Install the slave cylinder bolts (1) and tighten to 20 N.m (15 ft. lbs.).
    NOTE:

    Verify O-ring is on hydraulic line.

  3. Install the hydraulic line to the slave cylinder. Install the clip (3).
  4. Bleed the hydraulic system. Refer to STANDARD PROCEDURE .
  5. Install the battery tray. Refer to TRAY, BATTERY, INSTALLATION .
scientia non olet · About LEMON Manuals