LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 57 (Clutch System - 500) >> Cylinder, Clutch Master >> Removal

Cylinder, Clutch Master: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Raise the vehicle.
    GC0152955Courtesy of CHRYSLER GROUP, LLC
  2. Disconnect the high pressure line from the master cylinder and plug both openings.
  3. Lower the vehicle.
  4. Remove the battery tray Refer to TRAY, BATTERY, REMOVAL .
    GC0152954Courtesy of CHRYSLER GROUP, LLC
  5. Remove the supply hose from the brake master cylinder and plug both openings.
  6. Remove the instrument panel reinforcement. Refer to PANEL, INSTRUMENT, REMOVAL .
    GC0152957Courtesy of CHRYSLER GROUP, LLC
  7. Disconnect the clutch start (1) and brake lamp switches (2).
    GC0152958Courtesy of CHRYSLER GROUP, LLC
  8. Disconnect the brake pedal from the brake master cylinder.
  9. Remove the mounting nuts and remove the pedal assembly.
scientia non olet · About LEMON Manuals