Non-Dimming Panel Lamps Circuit
WARNING: This page is about a different variant/trim than selected.
| CONDITION | POSSIBLE CAUSES | CORRECTION |
|---|---|---|
| A SINGLE LAMP DOES NOT ILLUMINATE | 1. Ineffective ground circuit. | 1. Test and repair the open lamp ground circuit if required. |
| 2. Ineffective feed circuit. | 2. Test and repair the open lamp feed circuit if required. | |
| 3. Ineffective Light Emitting Diode (LED) unit. | 3. Test and replace the lamp bulb or LED unit if required. | |
| A SINGLE LAMP DOES NOT EXTINGUISH | 1. Ineffective feed circuit. | 1. Test and repair the shorted lamp feed circuit if required. |
| ALL LAMPS DO NOT ILLUMINATE | 1. Ineffective ground circuit. | 1. Test and repair the open lamp ground circuit if required. |
| 2. Ineffective feed circuit. | 2. Test and repair the open lamp feed circuit if required. | |
| 3. Ineffective BCM inputs or outputs. | 3. Use a diagnostic scan tool and the appropriate diagnostic information for further BCM diagnosis. |