LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Occupant Restraint Controller (Orc) - DTCS B0101-16 To B0116-1B - 500 - Electric) >> DTC Troubleshooting >> B0106-1B Front Driver Retractor PRETENSIONER-Circuit Resistance Above Threshold >> Set Condition

Set Condition

WARNING: This page is about a different variant/trim than selected.

The Occupant Restraint Controller (ORC) monitors the resistance of the Driver Seat Belt Tensioner circuits. The ORC will set this DTC if it detects high resistance on the Driver Seat Belt Tensioner circuits for 2.6 seconds. The DTC will change from active to stored when the ORC monitoring shows the open circuit fault is gone for 2.6 seconds. The multifunction indicator lamp (MIL) will set in the instrument cluster.

scientia non olet · About LEMON Manuals