LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 37 (Power Windows (Service Information) 500 - Electric) >> Switch, Power Window >> Installation

Switch, Power Window: Installation

WARNING: This page is about a different variant/trim than selected.
GC0152768Courtesy of CHRYSLER GROUP, LLC
  1. Position the switch (1) on the shifter bezel (3).
  2. Install, and tighten the fasteners securing the switch.
  3. Connect the electrical harness connectors (4) to the switches.
  4. Position the bezel assembly; aligning the clips (2) with the console, and press into place.
  5. Connect the 12 volt negative battery cable.
  6. Power up the high voltage system. Refer to HIGH-VOLTAGE POWER UP .
scientia non olet · About LEMON Manuals