Unit, Front Lamp, Lower: Removal: Lamp

WARNING: This page is about a different variant/trim than selected.

NOTE:

In vehicles manufactured for sale in the United States and Canada, the lower front combination lamp unit combines the front park, clearance, position, Daytime Running Lamp (DRL) bulb and the turn signal lamp bulb in a single lamp unit. In vehicles manufactured for sale in the Mexico and Latin America, the lower front combination lamp unit combines the front park, clearance, position, Daytime Running Lamp (DRL) bulb and the high beam headlamp bulb in a single lamp unit.

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate the battery negative cable.
Raise and support the vehicle.
Remove the front fascia from the vehicle. Refer to FASCIA, FRONT, REMOVAL .
Remove the three screws (1) that secure the lower front combination lamp unit (3) to the back side of the front fascia.
Remove the lower front combination lamp unit from the fascia.