Unit, Front Lamp, Lower: Installation: Lamp
WARNING: This page is about a different variant/trim than selected.
NOTE:
In vehicles manufactured for sale in the United States and Canada, the lower front combination lamp unit combines the front park, clearance, position, Daytime Running Lamp (DRL) bulb and the turn signal lamp bulb in a single lamp unit. In vehicles manufactured for sale in the Mexico and Latin America, the lower front combination lamp unit combines the front park, clearance, position, Daytime Running Lamp (DRL) bulb and the high beam headlamp bulb in a single lamp unit.
- Position the lower front combination lamp unit (3) onto the back side of the front fascia.
- Install and tighten the three screws (1) that secure the lamp to the fascia. Tighten the screws securely.
- Reinstall the front fascia onto the vehicle. Refer to FASCIA, FRONT, INSTALLATION .
- Reconnect the battery negative cable.