Switch, Hazard Warning: Description

WARNING: This page is about a different variant/trim than selected.

The hazard switch is integral to the upper instrument panel switch pod, which is secured to the instrument panel below the radio. A red, stencil-like International Control and Display Symbol icon for Hazard Warning identifies the momentary hazard switch button. The remainder of the hazard switch circuitry is concealed within the instrument panel switch pod. The hazard switch button has panel lamps dimmer controlled illumination for night visibility.

All of the circuitry and components of the hazard switch are contained within a molded black plastic upper instrument panel switch pod housing. A single connector receptacle is integral to the back of the switch pod housing. The switch is connected to the vehicle electrical system through a dedicated take out and connector of the instrument panel wire harness.

The hazard switch cannot be adjusted or repaired and, if ineffective or damaged, the entire upper instrument panel switch pod unit must be replaced. Refer to POD, SWITCH, REMOVAL .