LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 28 (Wiper System & Washer System (Service Information) 500 - Electric) >> Check Valve, Washer >> Installation

Check Valve, Washer: Installation

WARNING: This page is about a different variant/trim than selected.
GC0153291Courtesy of CHRYSLER GROUP, LLC
  1. Position the front washer system check valve (2) to the underside of the cowl plenum cover/grille panel (1). Be certain that the flow direction arrow molded into the check valve body is oriented towards the washer nozzles.
  2. From the underside of the cowl plenum cover/grille panel, connect the engine compartment and the two washer nozzle hoses (3) to the three barbed nipples of the check valve.
  3. Install the cowl plenum cover/grille panel over the cowl plenum. Refer to COVER, COWL PANEL, INSTALLATION .
scientia non olet · About LEMON Manuals