LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Body - Interior & Exterior - 500 - Electric) >> Seats >> Headrest >> Removal >> Front Seat Restraint Sleeves

Front Seat Restraint Sleeves

WARNING: This page is about a different variant/trim than selected.
GC0138103Courtesy of CHRYSLER GROUP, LLC
NOTE:

Typical front seat back and head restraint sleeves shown in the illustration.

  1. Remove the head restraint from the vehicle.
  2. Unzip the rear of the seat back cover to gain access to the head restraint sleeves (1).
  3. Using a small flat bladed tool (4) or equivalent, release the head restraint sleeve retaining tabs through the openings (2) in the seat back frame.
  4. Using a soft hammer (3) or equivalent, remove the head restraint sleeves.
scientia non olet · About LEMON Manuals