LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Body - Interior & Exterior - 500 - Electric) >> Seats >> Handle, Front Recliner >> Installation

Handle, Front Recliner: Installation

WARNING: This page is about a different variant/trim than selected.
GC0153139Courtesy of CHRYSLER GROUP, LLC
  1. Position the inboard seat cushion side shield (4) to the seat and install the two retaining screws. Tighten the screws securely.
  2. Install the seat back recliner lever (3).
  3. Install the screw (1) and washer (2) that secures the seat back recliner lever. Tighten the screw securely.
    GC0153138Courtesy of CHRYSLER GROUP, LLC
  4. Install the trim cap (1) onto the seat back recliner lever (2).
  5. Install the front seat. Refer to SEAT, FRONT, INSTALLATION .
scientia non olet · About LEMON Manuals