LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Body - Interior & Exterior - 500 - Electric) >> Hood >> Latch, Hood >> Installation

Latch, Hood: Installation

WARNING: This page is about a different variant/trim than selected.
GC0153125Courtesy of CHRYSLER GROUP, LLC
  1. Position the latch release (1).
  2. Accessing from the front of the vehicle, install the three fasteners securing the latch release (1). Tighten the fasteners securely.
  3. Press down latch release (1) and install the cable (2).
scientia non olet · About LEMON Manuals