LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Body - Interior & Exterior - 500 - Electric) >> DECKLID/Hatch/Liftgate/Tailgate/Swing Gate >> Prop, Gas >> Installation

Prop, Gas: Installation

WARNING: This page is about a different variant/trim than selected.
GC0153173Courtesy of CHRYSLER GROUP, LLC
  1. Make sure the retaining clips are seated into the ball socket fully.
  2. Install the gas prop/support cylinder (1) over the ball studs with the thin end connected to the liftgate and the retaining clips snapping into place.
scientia non olet · About LEMON Manuals