LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Horn System (Service Information) 500 - Electric) >> Relay, Horn >> Installation

Relay, Horn: Installation

WARNING: This page is about a different variant/trim than selected.
GC0157634Courtesy of CHRYSLER GROUP, LLC
  1. Refer to the fuse and relay layout map on the underside of the Power Distribution Center (PDC) (1) cover for the proper horn relay identification and cavity location.
  2. Position the horn relay in the proper cavity within the PDC.
  3. Align the relay terminals with the terminal cavities in the PDC.
  4. Push firmly and evenly on the top of the relay until the terminals are fully seated in the terminal cavities in the PDC.
  5. Install the cover onto the PDC.
  6. Perform the 12-Volt Power Up procedure. Refer to 12 VOLT POWER UP .
scientia non olet · About LEMON Manuals