LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2018 >> 500 Lounge, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Antilock Brake System (Abs) (Service Information) 500 - Electric) >> Operation >> Electronic Stability Control (ESC) >> Hydraulic Brake Assist

Hydraulic Brake Assist

WARNING: This page is about a different variant/trim than selected.

Brake assist is programmed into the Electronic Stability Control (ESC) system. During a panic stop, a pressure sensor determines when the driver is doing so by measuring the brake pedal pressure application rate. A high rate of pedal pressure application causes the ESC system to apply maximum available pressure to the brakes and the vehicle stops as quickly as available traction will allow.

scientia non olet · About LEMON Manuals