Sensor, Wheel Speed, Front: Removal

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Before proceeding, refer to WARNING and CAUTION .

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Disconnect the wheel speed sensor cable connector (1) from the wiring harness connector on the inner fender.
Separate sensor cable clips from retainers (2, 3).

Courtesy of CHRYSLER GROUP, LLC
Remove the speed sensor cable routing clips (1, 2, 3) from retainers.

Courtesy of CHRYSLER GROUP, LLC
Remove the mounting screw (1) fastening the wheel speed sensor head (2) to the knuckle. Pull the sensor head out of the knuckle and remove the wheel speed cable from the vehicle.