Sunroof, Single Pane: Operation
SUNSHADE:
To open the sunshade- Press button (1) to move the blind towards the rear part of the car, until it is fully open.
To close the sunshade- With blind fully open, press button (1), the blind will move towards the front part of the car, until it is fully closed.
The automatic sunshade movement can be stopped in any position by pressing a button again.
Excessive Force Limitation (EFL)- The sunshade is provided with an EFL safety device that can detect the presence of an obstacle during the closing movement. Should this occur, the travel of the sunshade is interrupted immediately.
Emergency/Manual Operation:
If the control buttons fail to operate, the sunshade and can be moved manually as described.
- Locate the access protective cap (3), located rearward of the headliner (1) sunroof opening.
- For the sunshade movement remove protective cap (3).
- Insert an appropriate sized allen wrench or the allen tool supplied in the vehicle's tool kit into the sunshade housing (3).
- Turn clockwise to open the sunshade. Turn counter clockwise to close the sunshade.
For additional information refer to OPERATION .