Inboard Side

Courtesy of CHRYSLER GROUP, LLC

Position the floor console armrest (1) in the raised position.
With the use of a trim stick (special tool #C-4755, Trim Stick) or equivalent, placed between the armrest (1) and arm rest bezel (2), release the armrest bezel (2) retainers.

Courtesy of CHRYSLER GROUP, LLC
Remove the armrest fasteners (2).
Remove the armrest (1).

Courtesy of CHRYSLER GROUP, LLC
With the use of a trim stick (special tool #C-4755, Trim Stick) or equivalent, release the retainers for the floor console rear cover (1).
Remove the floor console rear cover (1) from the floor console.
Position the seat fully rearward.

Courtesy of CHRYSLER GROUP, LLC
Using a small flat bladed tool or equivalent, remove the fastener cover from the side cover.
Remove the fasteners (2) from the inboard side cover.
Remove the fasteners (3) from the rear of the inboard side cover.
Move the inboard side cover (1) up and forward, releasing it from the seat.