Gap Hider, Steering Column Shroud: Removal

Courtesy of CHRYSLER GROUP, LLC

1. Using a Trim Stick (special tool #C-4755, Trim Stick) or equivalent, release control trim bezel (2) from the upper (1) and lower (3) steering column shroud.
2. Lower the steering wheel position lever (4).

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the fasteners (2) from the steering column shroud. (1).
4. Unclip the upper steering column and lower steering column shrouds.
5. Route the upper shroud off of the control lever.
6. Remove the steering column shroud from the vehicle.