Prop, Gas: Removal

Courtesy of CHRYSLER GROUP, LLC

1 - RETAINING CLIP

2 - BALL SOCKET

3 - BALL STUD

NOTE:

The support cylinders can be replaced one at a time.

Open and support the hood.

NOTE:

Lift the clips only enough to release the ball studs.

Courtesy of CHRYSLER GROUP, LLC

1 - BALL SOCKET

2 - RETAINING CLIP

3 - FLAT BLADED TOOL

4 - BALL STUD

Using a small flat bladed tool, or equivalent, release the retaining clips while pulling the ball socket away from the ball stud.

Courtesy of CHRYSLER GROUP, LLC

CAUTION:
Do not pull the supports from the middle while removing.
Pulling at the end only, remove the support cylinder (2) from the hood (1) side ball socket.
Pulling at the end only, remove the support cylinder (2) from the body bracket (3) ball socket.