LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500L Pop >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.4L Turbo Engine (Service Information) - 500L >> Engine Mounting >> Insulator, Engine Mount, Rear >> Installation

Insulator, Engine Mount, Rear: Installation

GC0152406Courtesy of CHRYSLER GROUP, LLC
  1. If removed, install the rear engine mount bracket (3) with two bolts (2) tightened to 80 N.m (59 ft. lbs.).
  2. Position the rear engine mount isolator (5) in the crossmember opening.
  3. Install the isolator through bolt (1).
  4. Install the two isolator to bracket bolts (4).
  5. Tighten the isolator through bolt (1) to 130 N.m (96 ft. lbs.).
  6. Tighten the two isolator to bracket bolts (4) to 60 N.m (44 ft. lbs.).
  7. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
scientia non olet · About LEMON Manuals