LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500L Pop >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.4L Turbo Engine (Service Information) - 500L >> Turbocharger System >> Valve, Surge >> Installation

Valve, Surge: Installation

  1. Install the surge vale into the turbocharger housing.
  2. Install the three bolts (1). Tighten the bolts and the nuts to 9 N.m (80 in. lbs.)
  3. Connect the surge valve connector (2).
    GC0153792Courtesy of CHRYSLER GROUP, LLC
  4. Install the upper heat shield.
  5. Install the new nuts (2) and the three bolts (1). Tighten to 9 N.m (80 in. lbs.)
    GC0153787Courtesy of CHRYSLER GROUP, LLC
  6. Install the air cleaner assembly (1)
  7. Connect the two vacuum fittings (4), tighten the clamp (3) at the air to turbocharger inlet tube.
  8. Connect the fresh air intake hose (2).
scientia non olet · About LEMON Manuals