Insulator, Engine Mount, Left: Installation

Courtesy of CHRYSLER GROUP, LLC

1. If removed, install the left engine mount bracket (1) to the automatic transmission with three bolts (2) tightened to 60 N.m (44 ft. lbs.).

   Courtesy of CHRYSLER GROUP, LLC

2. Install the LH engine mount isolator (1) with three bolts (2 and 3). First tighten the isolator to engine bracket bolt (3) to 110 N.m (81 ft. lbs.) and then tighten the isolator to body bolts (2) to 50 N.m (37 ft. lbs.).
3. Remove the jack.
4. Install the battery tray and battery. Refer to TRAY, BATTERY, INSTALLATION .
5. Install the belly pan

   Refer to BELLY PAN, INSTALLATION .