Bracket, Engine Mount, Right: Removal

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the right engine mount. Refer to INSULATOR, ENGINE MOUNT, REAR, REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Remove the bolt (5) and reposition the turbocharger wastegate solenoid (4).

Courtesy of CHRYSLER GROUP, LLC
Disengage the following retainers from the upper timing belt cover (1):
- Evaporative emissions purge hose (4).
- After run coolant pump return hose (3).
- Wastegate solenoid pressure inlet hose (2).
Courtesy of CHRYSLER GROUP, LLC
Remove the bolts (2 and 3) and the upper timing belt cover (1).

Courtesy of CHRYSLER GROUP, LLC
Remove the bolts (1a) and the RH engine mount bracket (1b).