LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500L Pop >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 1.4L Turbo Engine (Service Information) - 500L >> Engine Block >> Damper, Vibration >> Installation

Damper, Vibration: Installation

GC0152462Courtesy of CHRYSLER GROUP, LLC
  1. Align the locator pin on the crankshaft sprocket with the hole in the vibration damper (1). Install the vibration damper (1) with three bolts (2) tightened to 25 N.m (19 ft. lbs.).
  2. Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
  3. Install the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE .
  4. Install the right front wheel and tire assembly. Refer to INSTALLATION .
  5. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
  6. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals