Bezel, Instrument Cluster: Removal

Courtesy of CHRYSLER GROUP, LLC

Remove the steering column closeout panel. Refer to COVER, STEERING COLUMN OPENING, REMOVAL .

Courtesy of CHRYSLER GROUP, LLC
Remove the two lower steering column mounting fasteners (1).
Support the steering column with an appropriate device.

Courtesy of CHRYSLER GROUP, LLC
With the use of a small flat bladed tool or equivalent, remove the center from the retainer (1) located above the steering column.
With the use of trim remover (special tool #C-4829A, Remover, Trim) or equivalent, remove the retainer (1) securing the cluster bezel and fabric (2) to the instrument panel.
Repeat on the opposite side.

Courtesy of CHRYSLER GROUP, LLC
Using a Trim Stick (special tool #C-4755, Trim Stick) or equivalent, release the cluster bezel (1) retaining clips.
Remove the cluster bezel from the vehicle.