LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500L Pop >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Base Brakes (Service Information) - 500L >> Parking Brake >> Lever, Parking Brake >> Installation

Lever, Parking Brake: Installation

GC0152743Courtesy of CHRYSLER GROUP, LLC
  1. Place the parking brake lever (6) on the floor pan and install mounting bolts (2). Tighten the bolts to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Install the rear parking brake cables into the equalizer (3) on the parking brake lever output cable.
  3. Connect the wiring harness connector (2) to the parking brake switch (6).
  4. Perform parking brake adjustment procedure.
  5. Install the center floor console. Refer to CONSOLE, FLOOR, INSTALLATION .
  6. Remove the blocks from the tires and wheel assemblies.
  7. Connect the battery negative cable to its post on the battery.
scientia non olet · About LEMON Manuals