Cooler And Hoses, Charge Air: Removal
WARNING: This page is about a different variant/trim than selected.
- Remove the front bumper fascia. Refer to FASCIA, FRONT, REMOVAL
.
- Release the right cooler hose quick connect (1).
- Release the left cooler hose quick connect (1).
- Remove the bracket bolt (1)
- Swap over the cooler duct (2) as necessary.
- Remove the cooler (3) and hose assembly.
- Remove the bracket bolt (2).
- Swap over the cooler duct (1) as necessary.
- Remove the cooler (3) and hose assembly.