Audio/Video/Entertainment/Connectivity (Service Information) 500 - Except Electric: Radio: Installation

Courtesy of CHRYSLER GROUP, LLC

1. While installing the radio (1), connect the electrical connectors.
2. Install and tighten the four radio to instrument panel screws (2).

   Courtesy of CHRYSLER GROUP, LLC

3. Position the radio bezel (1) onto the instrument panel.
4. Install and tighten the four radio bezel to instrument panel screws.
5. Install the center instrument panel bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
6. Connect the negative battery cable.

NOTE:

The radio must be programmed after a radio replacement. Refer to MODULE, RADIO RECEIVER, MODULE PROGRAMMING .