LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Pop, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Body - Interior & Exterior - 500 - Except Electric >> Seats >> Cover, Seat Cushion, Front >> Disassembly

Cover, Seat Cushion, Front: Disassembly

NOTE:

Passenger seat shown. Driver seat similar.

GC0153148Courtesy of CHRYSLER GROUP, LLC
  1. Remove the seat bottom cushion and cover from the seat bottom frame. Refer to COVER, SEAT CUSHION, REAR, REMOVAL .
  2. Disengage the rear of the seat bottom cover (1) from the seat bottom cushion (2).
    GC0153149Courtesy of CHRYSLER GROUP, LLC
  3. Remove the hog rings (2) that secure the seat bottom cover (1) to the seat bottom cushion (3) and remove the cover.
  4. If necessary, remove and discard the heated seat pad from the seat bottom cushion. Refer to REMOVAL .
  5. If necessary, remove and discard the Occupant Detection Sensor (ODS) from the passenger side seat bottom cushion. Refer to SENSOR, OCCUPANT DETECTION, REMOVAL .
scientia non olet · About LEMON Manuals