LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Pop, Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Body - Interior & Exterior - 500 - Except Electric >> Hood >> Cable, Hood Release >> Removal

Cable, Hood Release: Removal

GC0153128Courtesy of CHRYSLER GROUP, LLC
  1. Remove the fasteners (2) securing the interior latch release (3) and remove the release.
    GC0153129Courtesy of CHRYSLER GROUP, LLC
  2. Press the handle down on the interior latch release (2) and remove the cable (1).
    GC0153125Courtesy of CHRYSLER GROUP, LLC
  3. Press the handle down on the exterior latch release (1) and remove the cable (2).
    GC0153126Courtesy of CHRYSLER GROUP, LLC
  4. Unclip the cable (2) from the retainer located on the inner fender panel.
  5. Pull out the grommet (1) and the cable (2) from the interior into the engine compartment.
  6. Pull the cable (2) from the latch through the front end module in the engine compartment.
  7. Remove the hood release cable (2).
scientia non olet · About LEMON Manuals