LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Pop, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.4L 16-Valve Engine (Service Information) - 500 >> Air Intake System >> Body, Air Cleaner >> Installation

Body, Air Cleaner: Installation

GC0152416Courtesy of CHRYSLER GROUP, LLC
  1. Lubricate the rubber mount socket (5) on the air cleaner body (6) with Mopar® Rubber Bushing Installation Lube.
  2. Install the coolant line (8) to the air cleaner housing and close the hose retainer (7).
  3. Push the air cleaner body (6) down onto the locating pin (5) on the intake manifold until the rubber mount socket is fully seated.
  4. Engage the air inlet hose (2) and install the air cleaner body (6) to the throttle body. Tighten the clamp (1) to 4 N.m (35 in. lbs.). BODY, AIR CLEANER, INSTALLATION 
  5. Install two bolts (4) and tighten to 5 N.m (45 in. lbs.).
  6. Install the fresh air make-up hose (3) to the air cleaner housing.
    GC0152354Courtesy of CHRYSLER GROUP, LLC
  7. Install the engine cover (1).
scientia non olet · About LEMON Manuals