Lever, Parking Brake: Removal
- Disconnect and isolate the battery negative cable.
- Block the tire and wheel assemblies so the vehicle does not move once the vehicle parking brake lever is released.
- Remove the floor console. Refer to CONSOLE, FLOOR, REMOVAL .
- Position parking brake boot (1) so that the mounting bolts and switch can be accessed.
- Release and lower the parking brake lever (5).
- Loosen the adjusting nut (4) on the equalizer and disconnect the brake actuation cables from the equalizer.
- Disconnect the wiring harness connector (6) from the parking brake switch.
- Remove the bolts (2) attaching the parking brake lever (5) to the vehicle.
- Remove the parking brake lever (5).