LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Electric Powertrain System - 500 - Electric) >> Electric Vehicle Control System >> Speaker, Pedestrian Alert >> Installation

Speaker, Pedestrian Alert: Installation

WARNING: This page is about a different variant/trim than selected.
GC0157778Courtesy of CHRYSLER GROUP, LLC
  1. Install the pedestrian alert speaker, and install and tighten the pedestrian alert speaker bolt (2) to 10 Nm (89 lbf-in).
  2. Connect the pedestrian alert speaker electrical connector (1).
  3. Install the front fascia. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals