LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2017 >> 500 Lounge, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 68 (Body - Interior & Exterior - 500 - Electric) >> Hood >> Hinge, Hood >> Installation

Hinge, Hood: Installation

WARNING: This page is about a different variant/trim than selected.
GC0153104Courtesy of CHRYSLER GROUP, LLC
  1. Align hood hinge with fastener holes.
  2. Install fasteners (2) in to hinge holes.
  3. Tighten nuts (3) to 20 Nm (15 lbf-ft).
  4. Install hood to hinge. Refer to INSTALLATION  .
  5. Install the cowl panel. Refer to INSTALLATION  .
scientia non olet · About LEMON Manuals